CMMS Work Orders for New Facility Maintenance Technicians

Almost every task a building maintenance technician does, from a dripping faucet to a rooftop filter change, starts and ends as a work order in a computerized maintenance management system, or CMMS. The software changes from employer to employer. The habits that make you trusted do not. Always follow your site's procedures and status codes.
What a CMMS does
A CMMS is the maintenance team's shared memory. It tells you what the asset is, what has already been tried, which parts were used, and when the next preventive task is due. Most systems:
- 1. Receive requests from occupants, supervisors, or connected alarms.
- 2. Schedule preventive maintenance and inspections.
- 3. Store equipment history, manuals, warranties, and nameplate data.
- 4. Track parts, labor time, and costs against an asset or a building.
- 5. Report on open work, response time, and repeat failures.
If the work is not in the CMMS, the team may treat it as if it never happened. If the notes are vague, the next person starts over. If you choose the wrong asset, the history lands on the wrong machine. If you are comparing career paths, see our guide to facility maintenance technicians and HVAC technicians.
Common types of work orders
| Type | Example |
| Corrective | Office too warm, leaking sink, broken light |
| Preventive | Monthly filter change, quarterly coil cleaning |
| Inspection | Daily boiler and chiller rounds |
| Emergency | Flooding, no heat, power loss |
| Project | Office move, fixture replacement |
Corrective work starts with a problem that already exists. Preventive work starts on a calendar or a runtime meter, and you complete every listed step even if the equipment looks fine. Emergency work is for conditions that put people, the building, or critical equipment at immediate risk. Your site's priority codes draw that line, so learn them in your first week. When you are unsure, protect the area and call a supervisor.
From request to close-out
- 1. A request is created by an occupant, a manager, an alarm, or a preventive schedule.
- 2. A supervisor or planner sets the priority and assigns a technician.
- 3. You review the request, the asset location, and the equipment history before you start.
- 4. You do the work safely and record findings, parts, and time.
- 5. You close the work order, or place it in a waiting status if parts, access, or a specialist are needed.
Before you start, match the asset tag to the ticket. If the ticket says RTU-3 and you are standing at RTU-4, stop and get the record corrected. Then read the history. Repeated "fixed it" tickets on the same symptom usually mean the real cause is still there, so write down the pattern and escalate instead of installing the same part again. If the job needs lockout tagout or a permit, put those controls in place before you begin and record that you used them. Skipping a lockout to finish faster is one of the most serious mistakes a new technician can make.

Writing notes the next technician can use
Strong notes answer four questions: what was found, what was done, what parts were used, and whether follow-up is needed. Avoid empty close-outs such as "complete," "fixed," or "done."
| Weak note | Stronger note |
| Complete | Replaced clogged filter on AHU-2. Supply air returned to normal. Recommend coil cleaning. |
| Need part | Chilled-water pump P-2 noisy at coupling. Locked out. Need replacement coupling. Pump remains out of service. |
| No problem found | Room 410 at 72 F, matching the thermostat setpoint. Could not reproduce the complaint. Asked occupant to resubmit if it returns. |
If your CMMS allows photos, attach a picture of the nameplate or the failed part. Photos help a supervisor order the right part, but they do not replace written notes.
Preventive and inspection work orders
Complete each listed step, record the readings the form asks for, and flag anything outside the normal range. If you find a repair that is not on the preventive list, finish the preventive work if it is safe to do so, then open a separate corrective work order. Do not bury a serious finding inside a checked box. Daily plant checks are often issued as repeating inspection tickets, and our guide to boiler and chiller rounds shows what to record. You can also practice the routine in perform preventive maintenance and routine maintenance for HVAC systems, and see the building-level view in our commercial building preventive maintenance checklist.
Comfort calls are a good place to practice clear intake. Ask which room, which thermostat, and what the occupant noticed. See how these calls are diagnosed in uneven temperatures in a commercial building and our guide to hot and cold complaints for facility managers.

Parts, time, and unfinished jobs
Record the parts you used against the correct asset, and say so if you borrowed a part from another machine. Record labor time honestly, because the goal is an accurate picture of how long jobs take. Close a work order only when the requested work is done, the space is safe, and your notes are complete. If you cannot finish, use the status that matches the situation and write who owns the next step:
- 1. Waiting for parts, with the part name and expected arrival.
- 2. Waiting for access, with who you contacted.
- 3. Waiting for a contractor or specialist, when the work is beyond your authorization.
- 4. Waiting for a shutdown, when the asset cannot come offline yet.
If you leave equipment out of service, say so in the first line of the note. Before you leave a shift, update every open work order you touched so the next technician does not have to call you.
Common mistakes new technicians make
- 1. Closing work orders with no notes, or with a single word.
- 2. Forgetting to record parts, or recording them on the wrong asset.
- 3. Fixing extra problems without creating a new work order.
- 4. Leaving finished jobs open, or marking unfinished work complete.
- 5. Skipping safety steps such as lockout tagout to save time.
- 6. Working on the wrong equipment because the asset tag was not checked.
Your work order history becomes your track record. Clear, honest notes are one of the fastest ways to earn trust on a maintenance team.
Career services and job placement after you graduate
Finishing training is only the first step. ImmerseLearn graduates get resume help, interview preparation, and job placement support through our employer partner network. Learn more on our Career Services page.
FAQs
A computerized maintenance management system is software that tracks work orders, equipment, preventive maintenance schedules, and parts for a building or campus. It is where you read the request, check equipment history, record what you did, and close the job. Employers use different systems, but the purpose is the same: a complete, searchable record of the work.
Write what you found, what you did, the parts used, the time spent, and whether follow-up is needed. Clear notes help the next technician and show your supervisor that the request was actually resolved.
A corrective work order fixes something that already failed or was reported, such as a leaking sink or a warm office. A preventive work order is scheduled service done before failure, such as a filter change or a quarterly inspection.
No. Employers use many different systems, and the habits are the same in all of them: read the request, confirm the asset, check history, do the work safely, record parts and time, and close the work order with clear notes. Moving to a new system is then mostly a matter of learning where the buttons are.
Next step
Heating and cooling fundamentals make this work easier to understand. See program details on the Certified HVAC Associate program page.
